What are lockpicking tools called

Lockpicking tools

You can use a variety of lockpicking tools to open a locked door without a key. The most common type of lockpicking tool is a tension wrench. This wrench is inserted into the bottom of the keyway to hold the pins in place while you use a pick to push the pins up.

Types of lockpicking tools

Once you have an understanding of how locks work, it’s time to start picking them! Lockpicking is a skill that allows you to open locks without the use of a key. There are a variety of tools that can be used for lockpicking, and the type of tool that you use will depend on the type of lock that you’re trying to pick. In this section, we’ll go over the different types of lockpicking tools and how they’re used.

Lock pickingtools can broadly be divided into two categories: tension wrenches and picks. Tension wrenches are used to apply torque to the plug of a lock, while picks are used to manipulate the pins in a lock. Let’s take a closer look at each type of tool.

Tension wrench: A tension wrench is a L-shaped tool that is inserted into the keyway of a lock. The short end of the wrench is inserted first, and the long end is used to apply torque to the plug of the lock. The amount of torque that is applied with a tension wrench is critical – too little torque and the pins will not bind in the shear line, while too much torque will cause the pins to bind before they reach the shear line. Finding the “sweet spot” takes practice, but it is essential for successful lock picking.
Picks: Picks are used to manipulate the pins in a lock so that they align with the shear line and allow the plug to rotate. There are a variety of picks available on the market, but basic picks can be made from simple household items like bobby pins. A pick set will usually include a few different picks so that you can find one that works well with each type of lock.

How to use lockpicking tools

Lockpicking tools, also known as burglar’s tools, are used to open locked doors without the use of a key. The most common type of lockpicking tool is a tension wrench, which is used to apply torque to the plug of a lock in order to rotate it. Other common lockpicking tools include picks, rake


Locksmiths are people who work with locks and keys. They make sure that our homes, cars, and other belongings are safe and secure. But what do they use to do their job? Let’s find out what lockpicking tools are called.

What do locksmiths do?

Locksmiths install, repair, and adjust a variety of locks and locking mechanisms, from standard tumbler locks to electronic card locks. They also make keys, re-key locks, and make duplicate keys. Most locksmiths work in service shops or in their own businesses. Some work for government agencies or large businesses.

How to become a locksmith

In order to become a locksmith, you will need to have a strong interest in hardware and how it works. You will also need to be good with your hands and have a steady hand, as locksmithing can be a very precise skill. There are many different tools that lockpickers use, and it is important to learn about all of the different types of tools before you decide to become a locksmith. Some of the most common lockpicking tools are listed below.

Lockpicking tools:

-Hooks: A hook is one of the most basic lockpicking tools, and is used to apply tension to the pins in a lock in order to allow them to be manipulated.
-Tension wrenches: A tension wrench is used in conjunction with hooks to apply tension to the pins in a lock. This allows the pins to be Manipulated so that they can be moved out of the way and the lock can be opened.
-Rakes: Rakes are used to push all of the pins in a lock up at once, which can sometimes cause thelock to open.
-Pick guns: Pick guns are electrical devices that are inserted into the keyway of a lock and then fired, which Will push all of the pins up at once and cause the lock to open.

The History of Lockpicking

Lockpicking tools have been around for centuries, and their use has been documented as early as the Roman Empire. In more recent history, lockpicking tools were used by locksmiths and burglars alike. Today, lockpicking is most often associated with the hobby of locksport.

Early lockpicking tools

While the earliest known lock picking tools date back to the Roman Empire, it wasn’t until the 18th century that lock picking really began to take off. With the industrial revolution came a need for more secure locks, and as a result, more sophisticated lock picking tools.

One of the most popular early lock picking tools was the “skeleton key”. These keys were simple in design and function, and allowed the user to open any number of similar locks. The only downside to these keys was that they could only be used on certain types of locks, and were easily detectable if left in the lock.

Another popular early lock picking tool was the “tension wrench”. This tool was used to apply torque to the plug of a pin tumbler lock in order to hold it in place while the pins were manipulated. This made it possible to pick a wide variety of different locks.

With the advent of more sophisticated locking mechanisms, such as those found on safes and vaults, lockpicking became increasingly difficult. This led to the development of more specialized tools, such as electric picks and microscopic cameras. Today, there are even computerized lockpicking devices that can be controlled via Bluetooth.

Modern lockpicking tools

Most lockpicking tools used today are very similar to those used in the past. The basic design consists of a tension wrench, which is used to apply torque to the lock, and a pick, which is used to manipulate the pins inside the lock.

The most popular type of tension wrench is the L-shaped wrench, which is inserted into the bottom of the lock. The pick is then inserted into the top of the lock and used to push up on the pins until they clear the shear line, at which point the lock will open.

There are many different picks available on the market, but most locksmiths prefer to use a half-diamond or a snake pick. These picks are able to reach all of the pins in a lock without having to remove and insert the pick multiple times.

Lock picking is an ancient art that has been around for centuries. It was once a required skill for all locksmiths, but with the advent of modern locks, it has become more of a hobby for many people.

The Future of Lockpicking

Lockpicking tools have been around for centuries, helping people to open locks without the key. In recent years, however, there have been some advancements in lockpicking tools that could change the future of the activity. Let’s take a look at some of these new lockpicking tools and how they could change the game.

New lockpicking tools

Tools for lockpicking have come a long way in recent years, and there are now some very sophisticated tools available on the market.

Lockpicks themselves have evolved, with some picks now featuring serrated or toothed edges to help grip the pins more securely. Some sets of lockpicks even come with a small set of files so that you can adjust the picks to fit your specific needs.

The quality of lockpicking tools has also increased, with many manufacturers now using high-quality materials such as stainless steel or titanium. This means that the tools are less likely to break orbent during use.

One of the most popular newlockpicking tools is the electric pick gun. This tool uses a small battery-powered motor to rapidly vibrate a pick inside the lock, making it easier to manipulate the pins and open the lock.

Another popular tool is the LED light source. This shines a bright light into the keyway, making it easier to see what you’re doing and identify any potential obstacles.

With so many new and innovative lockpicking tools available, there’s no excuse for not being able to open any lock!

New locksmithing techniques

In the past few years, there have been some major advancements in the field of locksmithing. New tools and techniques have been developed that make it easier than ever to pick a lock.

One of the most popular new tools is the electric pick gun. This tool uses a small motor to vibrate a picking tool at a high speed. This makes it much easier to open a lock without damaging it.

Another new technique that is becoming increasingly popular is called impressioning. This is where a locksmith makes a mold of a key that will fit the lock. Once the mold is made, it can be used to make a copy of the key. This technique can be used to make keys for any type of lock, including deadbolts and combination locks.

These new techniques are making it easier than ever for locksmiths to help people who have lost their keys or who need to get into a locked space in an emergency situation. If you find yourself in need of a locksmith, be sure to ask about these new techniques!

Op zoek naar meer inspiratie?

Als je op zoek bent naar meer inspiratie op het gebied van Tiny Houses, dan is dit boek een echte aanrader. Het boek bevat veel foto's van Nederlandse en Belgische tiny houses. Tiny house eigenaren zelf delen in het boek hun redenen waarom ze van tiny living houden.

About the author


Leave a Comment